PRICE REDUCED: Burris Fullfield TAC30 1-4x 24mm Scope FDE and Warne RAMP scope mount FDE

Meridian, ID
United States

Price
$400.00
Condition
New
Quantity Available
1
Category  Scopes/Optics

Description
DOES NOT INCLUDE the Trijicon red dot. Just for demonstration of the mount. That's a separate listing.
EVERYTHING LIKE NEW, IN BOXES, NO BLEMISHES OR SCRATCHES

Burris Fullfield TAC30 Rifle Scope 30mm Tube 1-4x 24mm 1/2 MOA Adjustments Illuminated Ballistic CQ Reticle Dark Earth - normally $330 value...

The Burris Fullfield TAC30 Rifle Scope is designed to stand up to the hard use of tactical shooters. This scope features high quality lenses with HiLume multi-coatings to provide a clear picture. Double-spring tension and an oversized ball-joint secure the hand-fitted internal zoom-assembly. The main tube is constructed of aircraft grade 6061T6 aluminum. Each scope is purged with laboratory-grade nitrogen to eliminate internal moisture and sealed with Burris-exclusive quad seals. The adjustment system is positive and repeatable with audible clicks ensuring unfailing shot-to-shot accuracy in all environments. Another key feature is the Ballistic CQ reticle which allows for rapid engagement of close quarters targets while also providing holdover points out to 600 yards when shooting a 62 grain 5.56x45mm load. The Burris Fullfield TAC30 Rifle Scope is covered by the Burris Forever Warranty. This Burris Fullfield TAC30 1-4x is available only at MidwayUSA (DISCONTINUED).

Note: The illumination button was designed so that it will not turn on when accidentally bumped. You must push the button with what you may perceive as excessive force to turn the illumination on/off or to switch between different levels.

Technical Information

Tube Diameter: 30mm
Adjustment Click Value: 1/2 MOA
Adjustment Type: Click
Exposed Turrets: No
Finger Adjustable Turrets: Yes
Turrets Resettable to Zero: No
Zero Stop: No
Turret Height: Low
Fast Focus Eyepiece: Yes
Lens Coating: Multi-coated lenses
Warranty: Lifetime factory warranty
Rings Included: No
Sunshade Included: No
Sunshade Length: N/A
Lens Covers Included: No
Power Variability: Variable
Min power: 1x
Max power: 4x
Reticle Construction: Glass etched
Reticle: Ballistic CQ
Illuminated Reticle: Yes
Battery Type: CR2032
Holdover reticle: Yes
Reticle Focal Plane Location: 2nd
Parallax Adjustment: No
Finish: Dark Earth
Water/Fogproof: Yes
Shockproof: Yes
Airgun Rated: No
Objective Bell Diameter: 30mm
Ocular Bell Diameter: 43mm
Eye Relief: 3.1-3.8"
Max Internal Adjustment: N/A
Exit Pupil Diameter: 24mm-6mm
Weight: 17 oz

Field of View at 100 Yards:
109' @ 1x
32'@ 4x

Dimensions, in inches unless otherwise stated:
A: 11.3
B: 7
C: 3.5
D: 2.125
E: 3.125
F: N/A
G: 30mm
H: 43mm

Warne RAMP Scope Mount FDE - normally $180 value

The Warne Rapid Acquisition Multi-Sight Platform or R.A.M.P.
is a cantilever style scope mounting platform that allows proper scope installation on the popular AR-15 rifle. By design, the AR platform was intended for fixed iron sights and did not offer an acceptable mounting surface for optics. As the weapon system evolved from the military designate M16A1 to the M16A3 and M4, Picatinny mounting systems became standard equipment. However, the rail system found on the A3 and the M4 weapons still did not allow a variable power optic to be mounted far enough forward with conventional scope mounts. The Warne R.A.M.P modular mounting system positions the front ring forward of the upper receiver by 1”. This allows the optics to be mounted farther forward enabling the shooter to have proper head orientation whether upright or prone without sacrificing or compromising due to improper positioning.
The Warne R.A.M.P also offers unique 45° mounting rails on both sides of the optic. As you know, variable power optics are great for distance but not CQB scenarios. Additionally, CQB sights are great for close quarters and entry scenarios but not for distance shots or target ID. So, which one do you choose? Why not have both? The R.A.M.P provides exactly that.
The primary sight can be as small as a 1-4 or as large as an 8.5-25 or a larger variable power optic. With a mini red dot on one or both sides of the ocular, a shooter can transition from scope to dot or dot to scope in less than a second by rotating the weapon 45° left or right. While the technique is not new, the position of the red dot is. By placing the sight under the ocular of the scope, we have provided a wider field of view through the mini red dot which makes acquiring the dot in the sight faster than you can imagine. And once again, you won’t have to sacrifice your shooting position when transitioning from sight to sight.
View Count 359